Network Working Group D. Thaler Request for Comments: 3559 Microsoft Category: Standards Track June 2003 Multicast Address Allocation MIB Status of this Memo This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited. Copyright Notice Copyright (C) The Internet Society (2003). All Rights Reserved. Abstract This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects used for managing multicast address allocation. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 2 2. The Internet-Standard Management Framework . . . . . . . . . . 2 3. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3.1. Protocol-independent objects . . . . . . . . . . . . . . 3 3.2. Protocol-specific objects. . . . . . . . . . . . . . . . 3 4. Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . 4 5. IANA Considerations. . . . . . . . . . . . . . . . . . . . . . 32 6. Security Considerations. . . . . . . . . . . . . . . . . . . . 33 7. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 34 8. Intellectual Property Statement. . . . . . . . . . . . . . . . 34 9. References . . . . . . . . . . . . . . . . . . . . . . . . . . 35 9.1. Normative References . . . . . . . . . . . . . . . . . . 35 9.2. Informative References . . . . . . . . . . . . . . . . . 35 10. Author's Address . . . . . . . . . . . . . . . . . . . . . . . 36 11. Full Copyright Statement . . . . . . . . . . . . . . . . . . . 37 Thaler Standards Track [Page 1] RFC 3559 Multicast Address Allocation MIB June 2003 1. Introduction This document defines a Management Information Base (MIB) module for managing multicast address allocation in a protocol-independent manner, as well as for managing specific protocols used in allocating multicast addresses. The protocol-independent objects in this MIB apply to all multicast address allocation servers (MAASs) and clients, as described in [ARCH], including those that allocate source-specific multicast addresses for the local machine. The protocol-specific objects in this MIB include objects related to the Multicast Address Dynamic Client Allocation Protocol (MADCAP) [MADCAP]. Interactions with the Multicast-scope Zone Announcement Protocol (MZAP) [MZAP] are also noted where appropriate. 2. The Internet-Standard Management Framework For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410]. Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580]. 3. Overview The purpose of this MIB module is to provide the ability to configure and monitor the status of multicast address allocation within the local domain. Some important monitoring questions which can be answered by this MIB module include: o How full is scope X? o Who's using up the space? o Who allocated a given address A? o Are requests being met? Thaler Standards Track [Page 2] RFC 3559 Multicast Address Allocation MIB June 2003 This MIB module is divided into two primary sections: o Protocol-independent objects relevant to all multicast address allocation servers and clients. o Protocol-specific objects related to the MADCAP client-server protocol. 3.1. Protocol-independent objects The protocol-independent objects consist of one "capabilities" scalar and five tables. The tables are: o The Scope Table contains information on the multicast scopes known to a multicast address allocation server. This table allows configuring scopes, and viewing what scopes are known to the local system after being configured elsewhere. o The Scope Name Table contains the names of the multicast scopes. This table logically extends the Scope Table with the list of scope names in various languages for each scope. o The Allocation Range Table contains the address ranges out of which the device may allocate addresses. It also allows answering the questions "How full is scope X?" and "Are requests being met?" o The Request Table contains the requests for address allocations, and allows answering the question "Who's using up the space?" o The Address Table contains the blocks of addresses which have been allocated, and together with the Request Table, allows answering the question "Who allocated a given address A?" 3.2. Protocol-specific objects The MADCAP objects consist of a group of (scalar) configuration parameters, and a group of (scalar) statistics. Thaler Standards Track [Page 3] RFC 3559 Multicast Address Allocation MIB June 2003 4. Definitions MALLOC-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, mib-2, Unsigned32, Gauge32, Counter32 FROM SNMPv2-SMI RowStatus, TruthValue, StorageType FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InetAddress, InetAddressType FROM INET-ADDRESS-MIB LanguageTag FROM IPMROUTE-STD-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB IANAscopeSource, IANAmallocRangeSource FROM IANA-MALLOC-MIB; mallocMIB MODULE-IDENTITY LAST-UPDATED "200306090000Z" -- June 9, 2003 ORGANIZATION "IETF MALLOC Working Group" CONTACT-INFO " WG-EMail: malloc@catarina.usc.edu Subscribe: malloc-request@catarina.usc.edu Archive: catarina.usc.edu/pub/multicast/malloc/ Co-chair/editor: Dave Thaler Microsoft Corporation One Microsoft Way Redmond, WA 98052 EMail: dthaler@microsoft.com Co-chair: Steve Hanna Sun Microsystems, Inc. One Network Drive Burlington, MA 01803 EMail: steve.hanna@sun.com" DESCRIPTION "The MIB module for management of multicast address allocation. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3559; see the RFC itself for full legal notices." Thaler Standards Track [Page 4] RFC 3559 Multicast Address Allocation MIB June 2003 -- revision log REVISION "200306090000Z" -- June 9, 2003 DESCRIPTION "Initial version, published as RFC 3559." ::= { mib-2 101 } mallocMIBObjects OBJECT IDENTIFIER ::= { mallocMIB 1 } malloc OBJECT IDENTIFIER ::= { mallocMIBObjects 1 } madcap OBJECT IDENTIFIER ::= { mallocMIBObjects 2 } -- -- scalars -- mallocCapabilities OBJECT-TYPE SYNTAX BITS { startTime(0), serverMobility(1), retryAfter(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the capabilities which a client or server supports. The startTime bit indicates that allocations with a future start time are supported. The serverMobility bit indicates that allocations can be renewed or released from a server other than the one granting the original allocation. The retryAfter bit indicates support for a waiting state where the client may check back at a later time to get the status of its request." ::= { malloc 1 } -- -- the Scope Table -- mallocScopeTable OBJECT-TYPE SYNTAX SEQUENCE OF MallocScopeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing information on multicast scopes from which addresses may be allocated. Entries in this table may be dynamically discovered via some other Thaler Standards Track [Page 5] RFC 3559 Multicast Address Allocation MIB June 2003 protocol, such as MZAP, or may be statically configured, such as in an isolated network environment. Each scope is associated with a range of multicast addresses, and ranges for different rows must be disjoint." ::= { malloc 2 } mallocScopeEntry OBJECT-TYPE SYNTAX MallocScopeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the information on a particular multicast scope." INDEX { mallocScopeAddressType, mallocScopeFirstAddress } ::= { mallocScopeTable 1 } MallocScopeEntry ::= SEQUENCE { mallocScopeAddressType InetAddressType, mallocScopeFirstAddress InetAddress, mallocScopeLastAddress InetAddress, mallocScopeHopLimit Unsigned32, mallocScopeStatus RowStatus, mallocScopeSource IANAscopeSource, mallocScopeDivisible TruthValue, mallocScopeServerAddressType InetAddressType, mallocScopeServerAddress InetAddress, mallocScopeSSM TruthValue, mallocScopeStorage StorageType } mallocScopeAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of the addresses in the multicast scope range. Legal values correspond to the subset of address families for which multicast address allocation is supported." ::= { mallocScopeEntry 1 } mallocScopeFirstAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The first address in the multicast scope range. The type of this address is determined by the value of the mallocScopeAddressType object." Thaler Standards Track [Page 6] RFC 3559 Multicast Address Allocation MIB June 2003 ::= { mallocScopeEntry 2 } mallocScopeLastAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The last address in the multicast scope range. The type of this address is determined by the value of the mallocScopeAddressType object." ::= { mallocScopeEntry 3 } mallocScopeHopLimit OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The default IPv4 TTL or IPv6 hop limit which applications should use for groups within the scope." DEFVAL { 255 } ::= { mallocScopeEntry 4 } mallocScopeStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table. If write access is supported, the other writable objects in this table may be modified even while the status is `active'." ::= { mallocScopeEntry 5 } mallocScopeSource OBJECT-TYPE SYNTAX IANAscopeSource MAX-ACCESS read-only STATUS current DESCRIPTION "The method by which this entry was learned." ::= { mallocScopeEntry 6 } mallocScopeDivisible OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If false, the server may allocate addresses out of the entire range. If true, the server must not allocate Thaler Standards Track [Page 7] RFC 3559 Multicast Address Allocation MIB June 2003 addresses out of the entire range, but may only allocate addresses out of a subrange learned via another method. Creating or deleting a scope which is not divisible has the side effect of creating or deleting the corresponding entry in the mallocAllocRangeTable. Deleting a scope which is divisible has the side effect of deleting any corresponding entries in the mallocAllocRangeTable, and the mallocRequestTable." DEFVAL { false } ::= { mallocScopeEntry 7 } mallocScopeServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of the address of a multicast address allocation server to which a request may be sent." DEFVAL { unknown } ::= { mallocScopeEntry 8 } mallocScopeServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address of a multicast address allocation server to which a request may be sent. The default value is an zero- length address, indicating that no server is known. The type of this address is determined by the value of the mallocScopeServerAddressType object." DEFVAL { ''h } -- the empty string ::= { mallocScopeEntry 9 } mallocScopeSSM OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether the scope is a Source-Specific Multicast (SSM) range." DEFVAL { false } ::= { mallocScopeEntry 10 } mallocScopeStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current Thaler Standards Track [Page 8] RFC 3559 Multicast Address Allocation MIB June 2003 DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { mallocScopeEntry 11 } -- -- the Scope Name Table -- mallocScopeNameTable OBJECT-TYPE SYNTAX SEQUENCE OF MallocScopeNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing information on multicast scope names. Entries in this table may be dynamically discovered via some other protocol, such as MZAP, or may be statically configured, such as in an isolated network environment." ::= { malloc 3 } mallocScopeNameEntry OBJECT-TYPE SYNTAX MallocScopeNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the information on a particular multicast scope name." INDEX { mallocScopeAddressType, mallocScopeFirstAddress, IMPLIED mallocScopeNameLangName } ::= { mallocScopeNameTable 1 } MallocScopeNameEntry ::= SEQUENCE { mallocScopeNameLangName LanguageTag, mallocScopeNameScopeName SnmpAdminString, mallocScopeNameDefault TruthValue, mallocScopeNameStatus RowStatus, mallocScopeNameStorage StorageType } mallocScopeNameLangName OBJECT-TYPE SYNTAX LanguageTag (SIZE(1..94)) MAX-ACCESS not-accessible STATUS current Thaler Standards Track [Page 9] RFC 3559 Multicast Address Allocation MIB June 2003 DESCRIPTION "The RFC 3066 language tag for the language of the scope name." ::= { mallocScopeNameEntry 1 } mallocScopeNameScopeName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The textual name associated with the multicast scope. The value of this object should be suitable for displaying to end-users, such as when allocating a multicast address in this scope. If the scope is an IPv4 scope, and no name is specified, the default value of this object should be the string 239.x.x.x/y with x and y replaced appropriately to describe the address and mask length associated with the scope. If the scope is an IPv6 scope, and no name is specified, the default value of this object should generically describe the scope level (e.g., site)." ::= { mallocScopeNameEntry 2 } mallocScopeNameDefault OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If true, indicates a preference that the name in the associated language should be used by applications if no name is available in a desired language." DEFVAL { false } ::= { mallocScopeNameEntry 3 } mallocScopeNameStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table. If write access is supported, the other writable objects in this table may be modified even while the status is `active'." ::= { mallocScopeNameEntry 4 } mallocScopeNameStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current Thaler Standards Track [Page 10] RFC 3559 Multicast Address Allocation MIB June 2003 DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { mallocScopeNameEntry 5 } -- -- the Allocation Range Table -- mallocAllocRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF MallocAllocRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing information on subranges of addresses from which the device may allocate addresses, if it is a MAAS. If the device is a Prefix Coordinator, any ranges which the device is advertising to MAAS's will be in this table. Note that the device may be both a MAAS and a Prefix Coordinator. Address ranges for different rows must be disjoint, and must be contained with the address range of the corresponding row of the mallocScopeTable. Deleting an allocation range has the side effect of deleting any entries within that range from the mallocAddressTable." ::= { malloc 4 } mallocAllocRangeEntry OBJECT-TYPE SYNTAX MallocAllocRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the information on a particular allocation range." INDEX { mallocScopeAddressType, mallocScopeFirstAddress, mallocAllocRangeFirstAddress } ::= { mallocAllocRangeTable 1 } MallocAllocRangeEntry ::= SEQUENCE { mallocAllocRangeFirstAddress InetAddress, mallocAllocRangeLastAddress InetAddress, mallocAllocRangeStatus RowStatus, mallocAllocRangeSource IANAmallocRangeSource, mallocAllocRangeLifetime Unsigned32, mallocAllocRangeMaxLeaseAddrs Unsigned32, Thaler Standards Track [Page 11] RFC 3559 Multicast Address Allocation MIB June 2003 mallocAllocRangeMaxLeaseTime Unsigned32, mallocAllocRangeNumAllocatedAddrs Gauge32, mallocAllocRangeNumOfferedAddrs Gauge32, mallocAllocRangeNumWaitingAddrs Gauge32, mallocAllocRangeNumTryingAddrs Gauge32, mallocAllocRangeAdvertisable TruthValue, mallocAllocRangeTotalAllocatedAddrs Gauge32, mallocAllocRangeTotalRequestedAddrs Gauge32, mallocAllocRangeStorage StorageType } mallocAllocRangeFirstAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The first address in the allocation range. The type of this address is determined by the value of the mallocScopeAddressType object." ::= { mallocAllocRangeEntry 1 } mallocAllocRangeLastAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The last address in the allocation range. The type of this address is determined by the value of the mallocScopeAddressType object." ::= { mallocAllocRangeEntry 2 } mallocAllocRangeStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table. If write access is supported, the other writable objects in this table may be modified even while the status is `active'." ::= { mallocAllocRangeEntry 3 } mallocAllocRangeSource OBJECT-TYPE SYNTAX IANAmallocRangeSource MAX-ACCESS read-only STATUS current DESCRIPTION "The means by which this entry was learned." Thaler Standards Track [Page 12] RFC 3559 Multicast Address Allocation MIB June 2003 ::= { mallocAllocRangeEntry 4 } mallocAllocRangeLifetime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The number of seconds remaining in the lifetime of the (sub)range out of which addresses are being allocated. A value of 0 indicates that the range is not subject to aging." DEFVAL { 0 } ::= { mallocAllocRangeEntry 5 } mallocAllocRangeMaxLeaseAddrs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of addresses which the server is willing to grant for each future request in this range. A value of 0 means that no specific limit is enforced, as long as the server has valid addresses to allocate." DEFVAL { 0 } ::= { mallocAllocRangeEntry 6 } mallocAllocRangeMaxLeaseTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum lifetime which the server will grant for future requests in this range. A value of 0 means that no additional limit is enforced beyond that of mallocAllocRangeLifetime." DEFVAL { 0 } ::= { mallocAllocRangeEntry 7 } mallocAllocRangeNumAllocatedAddrs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of addresses in the range which have been allocated. This value can be used to determine the current address space utilization within the scoped range. This Thaler Standards Track [Page 13] RFC 3559 Multicast Address Allocation MIB June 2003 should match the total number of addresses for this scope covered by entries in the mallocAddressTable." ::= { mallocAllocRangeEntry 8 } mallocAllocRangeNumOfferedAddrs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of addresses in the range which have been offered. This number should match the sum of mallocRequestNumAddrs for all entries in the mallocRequestTable in the offered state. Together with mallocAllocRangeNumAllocatedAddrs and mallocAllocRangeNumTryingAddrs, this can be used to determine the address space utilization within the scoped range in the immediate future." ::= { mallocAllocRangeEntry 9 } mallocAllocRangeNumWaitingAddrs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of addresses in the range which have been requested, but whose state is waiting, while the server attempts to acquire more address space." ::= { mallocAllocRangeEntry 10 } mallocAllocRangeNumTryingAddrs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of addresses in the scope covered by entries in the mallocRequestTable in the trying state." ::= { mallocAllocRangeEntry 11 } mallocAllocRangeAdvertisable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object is true if the range is eligible to be advertised to other MAASs. When the row is first created, the default value of this object is true if the scope is divisible, and is false otherwise." ::= { mallocAllocRangeEntry 12 } Thaler Standards Track [Page 14] RFC 3559 Multicast Address Allocation MIB June 2003 mallocAllocRangeTotalAllocatedAddrs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The approximate number of addresses in the range which have been allocated by any MAAS, as determined by a Prefix Coordinator. This object need only be present if mallocAllocRangeAdvertisable is true. If the number is unknown, a value of 0 may be reported." ::= { mallocAllocRangeEntry 13 } mallocAllocRangeTotalRequestedAddrs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The approximate number of addresses in the range for which there is potential demand among MAASs, as determined by a Prefix Coordinator. This object need only be present if mallocAllocRangeAdvertisable is true. If the number is unknown, a value of 0 may be reported." ::= { mallocAllocRangeEntry 14 } mallocAllocRangeStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { mallocAllocRangeEntry 15 } -- -- the Request Table -- mallocRequestTable OBJECT-TYPE SYNTAX SEQUENCE OF MallocRequestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing information on allocation requests, whether allocated or in progress. This table may also be used to determine which clients are responsible for high address space utilization within a given scope. Thaler Standards Track [Page 15] RFC 3559 Multicast Address Allocation MIB June 2003 Entries in this table reflect requests dynamically received by an address allocation protocol." ::= { malloc 5 } mallocRequestEntry OBJECT-TYPE SYNTAX MallocRequestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the information on a particular allocation request." INDEX { mallocRequestId } ::= { mallocRequestTable 1 } MallocRequestEntry ::= SEQUENCE { mallocRequestId Unsigned32, mallocRequestScopeAddressType InetAddressType, mallocRequestScopeFirstAddress InetAddress, mallocRequestStartTime Unsigned32, mallocRequestEndTime Unsigned32, mallocRequestNumAddrs Unsigned32, mallocRequestState INTEGER, mallocRequestClientAddressType InetAddressType, mallocRequestClientAddress InetAddress, mallocRequestServerAddressType InetAddressType, mallocRequestServerAddress InetAddress, mallocRequestLeaseIdentifier OCTET STRING } mallocRequestId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary value identifying this row." ::= { mallocRequestEntry 1 } mallocRequestScopeAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the first address of the scope to which the request applies. Legal values correspond to the subset of address families for which multicast address allocation is supported." ::= { mallocRequestEntry 2 } Thaler Standards Track [Page 16] RFC 3559 Multicast Address Allocation MIB June 2003 mallocRequestScopeFirstAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The first address of the scope to which the request applies. This must match mallocScopeFirstAddress for some row in the mallocScopeTable. The type of this address is determined by the value of the mallocRequestScopeAddressType object." ::= { mallocRequestEntry 3 } mallocRequestStartTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds remaining before the start time of the request. A value of 0 means that the allocation is currently in effect." ::= { mallocRequestEntry 4 } mallocRequestEndTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds remaining before the end time of the request." ::= { mallocRequestEntry 5 } mallocRequestNumAddrs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of addresses requested. If the addresses have been allocated, this number should match the total number of addresses for this request covered by entries in the mallocAddressTable." ::= { mallocRequestEntry 6 } mallocRequestState OBJECT-TYPE SYNTAX INTEGER { allocated(1), offered(2), -- tentatively allocated Thaler Standards Track [Page 17] RFC 3559 Multicast Address Allocation MIB June 2003 waiting(3), -- waiting for more space trying(4) -- working on allocating } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the request. A value of allocated(1) indicates that one or more entries for this request are present in the mallocAddressTable. A value of offered(2) indicates that addresses have been offered to the client (e.g. via a MADCAP OFFER message), but the allocation has not been committed. A value of waiting(3) indicates that the allocation is blocked while the server attempts to acquire more space from which it can allocate addresses. A value of trying(4) means that no addresses have been offered to the client, but that an attempt to allocate is in progress." ::= { mallocRequestEntry 7 } mallocRequestClientAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the address of the client that (last) requested this allocation." ::= { mallocRequestEntry 8 } mallocRequestClientAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the client that (last) requested this allocation. The type of this address is determined by the value of the mallocRequestClientAddressType object." ::= { mallocRequestEntry 9 } mallocRequestServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the address of the server to which the request was (last) sent." ::= { mallocRequestEntry 10 } Thaler Standards Track [Page 18] RFC 3559 Multicast Address Allocation MIB June 2003 mallocRequestServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the server to which the request was (last) sent. The type of this address is determined by the value of the mallocRequestServerAddressType object." ::= { mallocRequestEntry 11 } mallocRequestLeaseIdentifier OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Lease Identifier of this request. If the allocation mechanism in use does not use Lease Identifiers, then the value is a 0-length string." ::= { mallocRequestEntry 12 } -- -- the Address Table -- mallocAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF MallocAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing information on blocks of allocated addresses. This table may be used to map a given multicast group address to the associated request." ::= { malloc 6 } mallocAddressEntry OBJECT-TYPE SYNTAX MallocAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the information on a particular block of allocated addresses. The block of addresses covered by each entry in this table must fall within a range corresponding to an entry in the mallocAllocRangeTable." INDEX { mallocAddressAddressType, mallocAddressFirstAddress } ::= { mallocAddressTable 1 } Thaler Standards Track [Page 19] RFC 3559 Multicast Address Allocation MIB June 2003 MallocAddressEntry ::= SEQUENCE { mallocAddressAddressType InetAddressType, mallocAddressFirstAddress InetAddress, mallocAddressNumAddrs Unsigned32, mallocAddressRequestId Unsigned32 } mallocAddressAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of the first address in the allocated block. Legal values correspond to the subset of address families for which multicast address allocation is supported." ::= { mallocAddressEntry 1 } mallocAddressFirstAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0..20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The first address in the allocated block. The type of this address is determined by the value of the mallocAddressAddressType object." ::= { mallocAddressEntry 2 } mallocAddressNumAddrs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of addresses in the allocated block." ::= { mallocAddressEntry 3 } mallocAddressRequestId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the request which caused this block of addresses to be allocated. This value must match the value of mallocRequestId for some entry in the mallocRequestTable." ::= { mallocAddressEntry 4 } -- -- MADCAP-specific objects Thaler Standards Track [Page 20] RFC 3559 Multicast Address Allocation MIB June 2003 -- madcapConfig OBJECT-IDENTITY STATUS current DESCRIPTION "Group of objects that count various MADCAP events." ::= { madcap 1 } madcapConfigExtraAllocationTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of extra time on either side of a lease which the MADCAP server allocates to allow for clock skew among clients." ::= { madcapConfig 1 } madcapConfigNoResponseDelay OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time the MADCAP client allows for receiving a response from a MADCAP server." ::= { madcapConfig 2 } madcapConfigOfferHold OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time the MADCAP server will reserve an address for after sending an OFFER message in anticipation of receiving a REQUEST message." ::= { madcapConfig 3 } madcapConfigResponseCacheInterval OBJECT-TYPE SYNTAX Unsigned32 (0..300) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time the MADCAP server uses to detect duplicate messages." Thaler Standards Track [Page 21] RFC 3559 Multicast Address Allocation MIB June 2003 ::= { madcapConfig 4 } madcapConfigClockSkewAllowance OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The clock skew threshold used by the MADCAP server to generate Excessive Clock Skew errors." ::= { madcapConfig 5 } madcapCounters OBJECT-IDENTITY STATUS current DESCRIPTION "A group of objects that count various MADCAP events." ::= { madcap 2 } madcapTotalErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transactions for which the MADCAP server has detected an error of any type, regardless of whether the server ignored the request or generated a NAK." ::= { madcapCounters 1 } madcapRequestsDenied OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid requests for which the MADCAP server could not complete an allocation, regardless of whether NAKs were sent. This corresponds to the Valid Request Could Not Be Completed error code in MADCAP." ::= { madcapCounters 2 } madcapInvalidRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of invalid requests received by the MADCAP server, regardless of whether NAKs were sent. This corresponds to the Invalid Request error code in MADCAP." ::= { madcapCounters 3 } Thaler Standards Track [Page 22] RFC 3559 Multicast Address Allocation MIB June 2003 madcapExcessiveClockSkews OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests received by the MADCAP server with an excessive clock skew, regardless of whether NAKs were sent. This corresponds to the Excessive Clock Skew error code in MADCAP." ::= { madcapCounters 4 } madcapBadLeaseIds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests received by the MADCAP server with an unrecognized Lease Identifier, regardless of whether NAKs were sent. This corresponds to the Lease Identifier Not Recognized error code in MADCAP." ::= { madcapCounters 5 } madcapDiscovers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DISCOVER messages received by the MADCAP server." ::= { madcapCounters 6 } madcapInforms OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of INFORM messages received by the MADCAP server." ::= { madcapCounters 7 } madcapRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of REQUEST messages received by the MADCAP server." ::= { madcapCounters 8 } Thaler Standards Track [Page 23] RFC 3559 Multicast Address Allocation MIB June 2003 madcapRenews OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RENEW messages received by the MADCAP server." ::= { madcapCounters 9 } madcapReleases OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RELEASE messages received by the MADCAP server." ::= { madcapCounters 10 } -- conformance information mallocConformance OBJECT IDENTIFIER ::= { mallocMIB 2 } mallocCompliances OBJECT IDENTIFIER ::= { mallocConformance 1 } mallocGroups OBJECT IDENTIFIER ::= { mallocConformance 2 } -- compliance statements mallocServerReadOnlyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for multicast address allocation servers implementing the MALLOC MIB without support for read-create (i.e., in read-only mode). Such a server can then be monitored but can not be configured with this MIB." MODULE -- this module MANDATORY-GROUPS { mallocBasicGroup, mallocServerGroup } OBJECT mallocScopeLastAddress MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocScopeHopLimit MIN-ACCESS read-only DESCRIPTION "Write access is not required." Thaler Standards Track [Page 24] RFC 3559 Multicast Address Allocation MIB June 2003 OBJECT mallocScopeStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocScopeDivisible MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocScopeSSM MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocScopeStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocScopeNameScopeName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocScopeNameDefault MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocScopeNameStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocScopeNameStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocAllocRangeLastAddress MIN-ACCESS read-only DESCRIPTION "Write access is not required." Thaler Standards Track [Page 25] RFC 3559 Multicast Address Allocation MIB June 2003 OBJECT mallocAllocRangeStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocAllocRangeLifetime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocAllocRangeMaxLeaseAddrs MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocAllocRangeMaxLeaseTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocAllocRangeStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." GROUP madcapServerGroup DESCRIPTION "This group is mandatory for servers which implement the MADCAP client-server protocol." OBJECT madcapConfigExtraAllocationTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT madcapConfigOfferHold MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT madcapConfigResponseCacheInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." Thaler Standards Track [Page 26] RFC 3559 Multicast Address Allocation MIB June 2003 OBJECT madcapConfigClockSkewAllowance MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { mallocCompliances 1 } mallocClientReadOnlyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for clients implementing the MALLOC MIB without support for read-create (i.e., in read- only mode). Such clients can then be monitored but can not be configured with this MIB." MODULE -- this module MANDATORY-GROUPS { mallocBasicGroup, mallocClientGroup } GROUP mallocClientScopeGroup DESCRIPTION "This group is mandatory for clients which maintain a list of multicast scopes." OBJECT mallocScopeLastAddress MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocScopeHopLimit MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocScopeStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocScopeServerAddressType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocScopeServerAddress MIN-ACCESS read-only DESCRIPTION "Write access is not required." Thaler Standards Track [Page 27] RFC 3559 Multicast Address Allocation MIB June 2003 OBJECT mallocScopeSSM MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocScopeStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." GROUP madcapClientGroup DESCRIPTION "This group is mandatory for clients which implement the MADCAP client-server protocol." OBJECT madcapConfigNoResponseDelay MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { mallocCompliances 2 } mallocPrefixCoordinatorReadOnlyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for prefix coordinators implementing the MALLOC MIB without support for read-create (i.e., in read-only mode). Such devices can then be monitored but can not be configured with this MIB." MODULE -- this module MANDATORY-GROUPS { mallocBasicGroup, mallocPrefixCoordinatorGroup } OBJECT mallocScopeLastAddress MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocScopeDivisible MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocAllocRangeLastAddress MIN-ACCESS read-only DESCRIPTION "Write access is not required." Thaler Standards Track [Page 28] RFC 3559 Multicast Address Allocation MIB June 2003 OBJECT mallocAllocRangeStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocAllocRangeLifetime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocAllocRangeAdvertisable MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mallocAllocRangeStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { mallocCompliances 3 } mallocServerFullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for multicast address allocation servers implementing the MALLOC MIB with support for read- create. Such servers can then be both monitored and configured with this MIB." MODULE -- this module MANDATORY-GROUPS { mallocBasicGroup, mallocServerGroup } GROUP madcapServerGroup DESCRIPTION "This group is mandatory for servers which implement the MADCAP client-server protocol." ::= { mallocCompliances 4 } mallocClientFullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for hosts implementing the MALLOC MIB with support for read-create. Such clients can then be both monitored and configured with this MIB." MODULE -- this module MANDATORY-GROUPS { mallocBasicGroup, mallocClientGroup } Thaler Standards Track [Page 29] RFC 3559 Multicast Address Allocation MIB June 2003 GROUP mallocClientScopeGroup DESCRIPTION "This group is mandatory for clients which maintain a list of multicast scopes." GROUP madcapClientGroup DESCRIPTION "This group is mandatory for clients which implement the MADCAP client-server protocol." ::= { mallocCompliances 5 } mallocPrefixCoordinatorFullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for prefix coordinators implementing the MALLOC MIB with support for read-create. Such devices can then be both monitored and configured with this MIB." MODULE -- this module MANDATORY-GROUPS { mallocBasicGroup, mallocPrefixCoordinatorGroup } ::= { mallocCompliances 6 } -- units of conformance mallocBasicGroup OBJECT-GROUP OBJECTS { mallocCapabilities, mallocRequestScopeAddressType, mallocRequestScopeFirstAddress, mallocRequestStartTime, mallocRequestEndTime, mallocRequestNumAddrs, mallocRequestState, mallocAddressNumAddrs, mallocAddressRequestId } STATUS current DESCRIPTION "The basic collection of objects providing management of IP multicast address allocation." ::= { mallocGroups 1 } mallocServerGroup OBJECT-GROUP OBJECTS { mallocScopeLastAddress, mallocScopeHopLimit, mallocScopeSSM, mallocScopeStatus, mallocScopeStorage, mallocAllocRangeLastAddress, mallocAllocRangeLifetime, mallocAllocRangeNumAllocatedAddrs, mallocAllocRangeNumOfferedAddrs, mallocAllocRangeNumWaitingAddrs, mallocAllocRangeNumTryingAddrs, mallocAllocRangeMaxLeaseAddrs, Thaler Standards Track [Page 30] RFC 3559 Multicast Address Allocation MIB June 2003 mallocAllocRangeMaxLeaseTime, mallocAllocRangeSource, mallocAllocRangeStatus, mallocAllocRangeStorage, mallocScopeDivisible, mallocScopeSource, mallocScopeNameScopeName, mallocScopeNameDefault, mallocScopeNameStatus, mallocScopeNameStorage, mallocRequestClientAddressType, mallocRequestClientAddress } STATUS current DESCRIPTION "A collection of objects providing management of multicast address allocation in servers." ::= { mallocGroups 2 } mallocClientGroup OBJECT-GROUP OBJECTS { mallocRequestServerAddressType, mallocRequestServerAddress } STATUS current DESCRIPTION "A collection of objects providing management of multicast address allocation in clients." ::= { mallocGroups 3 } madcapServerGroup OBJECT-GROUP OBJECTS { madcapConfigClockSkewAllowance, madcapConfigExtraAllocationTime, madcapConfigOfferHold, madcapConfigResponseCacheInterval, madcapTotalErrors, madcapRequestsDenied, madcapInvalidRequests, madcapBadLeaseIds, madcapExcessiveClockSkews, madcapDiscovers, madcapInforms, madcapRequests, madcapRenews, madcapReleases } STATUS current DESCRIPTION "A collection of objects providing management of MADCAP servers." ::= { mallocGroups 4 } madcapClientGroup OBJECT-GROUP OBJECTS { mallocRequestLeaseIdentifier, madcapConfigNoResponseDelay } STATUS current DESCRIPTION "A collection of objects providing management of MADCAP clients." ::= { mallocGroups 5 } Thaler Standards Track [Page 31] RFC 3559 Multicast Address Allocation MIB June 2003 mallocClientScopeGroup OBJECT-GROUP OBJECTS { mallocScopeLastAddress, mallocScopeHopLimit, mallocScopeStatus, mallocScopeStorage, mallocScopeSource, mallocScopeServerAddressType, mallocScopeServerAddress, mallocScopeSSM, mallocScopeNameScopeName, mallocScopeNameDefault, mallocScopeNameStatus, mallocScopeNameStorage } STATUS current DESCRIPTION "A collection of objects providing management of multicast scope information in clients." ::= { mallocGroups 6 } mallocPrefixCoordinatorGroup OBJECT-GROUP OBJECTS { mallocAllocRangeLastAddress, mallocAllocRangeLifetime, mallocAllocRangeStatus, mallocAllocRangeStorage, mallocAllocRangeSource, mallocAllocRangeTotalAllocatedAddrs, mallocAllocRangeTotalRequestedAddrs, mallocAllocRangeAdvertisable, mallocScopeLastAddress, mallocScopeDivisible, mallocScopeSource } STATUS current DESCRIPTION "A collection of objects for managing Prefix Coordinators." ::= { mallocGroups 7 } END 5. IANA Considerations The IANAscopeSource and IANAmallocRangeSource textual conventions are imported from the IANA-MALLOC-MIB. The purpose of defining these textual conventions in a separate MIB module is to allow additional values to be defined without having to issue a new version of this document. The Internet Assigned Numbers Authority (IANA) is responsible for the assignment of all Internet numbers, including various SNMP-related numbers; it will administer the values associated with these textual conventions. The rules for additions or changes to the IANA-MALLOC-MIB are outlined in the DESCRIPTION clause associated with its MODULE- IDENTITY statement. The current versions of the IANA-MALLOC-MIB can be accessed from the IANA home page at: "http://www.iana.org/". Thaler Standards Track [Page 32] RFC 3559 Multicast Address Allocation MIB June 2003 6. Security Considerations There are a number of management objects defined in this MIB module with a MAX-ACCESS clause of read-write and/or read-create. Such objects may be considered sensitive or vulnerable in some network environments. The support for SET operations in a non-secure environment without proper protection can have a negative effect on network operations. These are the tables and objects and their sensitivity/vulnerability: mallocScopeTable,mallocAllocRangeTable: Unauthorized modifications to these tables can result in denial of service by not being able to allocate and use multicast addresses, allocating too many addresses, allocating addresses that other organizations are already using, or causing applications to use a hop limit that results in extra bandwidth usage. mallocScopeNameTable: Unauthorized modifications to this table can result in incorrect or misleading scope names being presented to users, resulting in potentially using the wrong scope for application data. madcapConfigExtraAllocationTime,madcapConfigOfferHold: Unauthorized modifications to these objects can result in reservations lasting too long, potentially resulting in denial of service if allocation ranges are small. madcapConfigNoResponseDelay: Unauthorized modifications can result in a client not being able to allocate multicast addresses. Some of the readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) may be considered sensitive or vulnerable in some network environments. It is thus important to control GET and/or NOTIFY access to these objects and possibly to encrypt the values of these objects when sending them over the network via SNMP. These are the tables and objects and their sensitivity/vulnerability: mallocRequestLeaseIdentifier: If address allocation servers are configured to allow renewal or release purely on the basis of knowledge of the Lease Identifier, then unauthorized read access to mallocRequestLeaseIdentifier can be used in a denial-of-service attack. SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example by using IPSec), there is no control as to who on the secure network is allowed to Thaler Standards Track [Page 33] RFC 3559 Multicast Address Allocation MIB June 2003 access and GET/SET (read/change/create/delete) the objects in this MIB module. It is RECOMMENDED that implementers consider the security features as provided by the SNMPv3 framework (see [RFC3410], section 8), including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy). Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured for only those principals (users) with legitimate rights to have access to GET or SET (change/create/delete) objects. 7. Acknowledgements This MIB module was updated based on feedback from the IETF's Multicast Address Allocation (MALLOC) Working Group. Lars Viklund, Frank Strauss, and Mike Heard provided helpful feedback on this document. 8. Intellectual Property Statement The IETF takes no position regarding the validity or scope of any intellectual property or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; neither does it represent that it has made any effort to identify any such rights. Information on the IETF's procedures with respect to rights in standards-track and standards-related documentation can be found in BCP-11. Copies of claims of rights made available for publication and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementors or users of this specification can be obtained from the IETF Secretariat. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights which may cover technology that may be required to practice this standard. Please address the information to the IETF Executive Director. Thaler Standards Track [Page 34] RFC 3559 Multicast Address Allocation MIB June 2003 9. References 9.1. Normative References [ARCH] Thaler, D., Handley, M. and D. Estrin, "The Internet Multicast Address Allocation Architecture", RFC 2908, September 2000. [MADCAP] Hanna, S., Patel, B. and M. Shah, "Multicast Address Dynamic Client Allocation Protocol (MADCAP)", RFC 2730, December 1999. [RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. [RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999. [RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999. [RFC2932] McCloghrie, K., Farinacci, D. and D. Thaler, "IPv4 Multicast Routing MIB", RFC 2932, October 2000. [RFC3291] Daniele, M., Haberman, B., Routhier, S. and J. Schoenwaelder, "Textual Conventions for Internet Network Addresses", RFC 3291, May 2002. [RFC3411] Harrington, D., Presuhn, R. and B. Wijnen, "An Architecture for Describing Simple Network Management Protocol (SNMP) Management Frameworks", STD 62, RFC 3411, December 2002. 9.2. Informative References [IPSEC] Kent, S. and R. Atkinson, "Security Architecture for the Internet Protocol", RFC 2401, November 1998. [MZAP] Handley, M., Thaler, D. and R. Kermode, "Multicast-Scope Zone Announcement Protocol (MZAP)", RFC 2776, February 2000. [RFC3410] Case, J., Mundy, R., Partain, D. and B. Stewart, "Introduction and Applicability Statements for Internet Standard Management Framework", RFC 3410, December 2002. Thaler Standards Track [Page 35] RFC 3559 Multicast Address Allocation MIB June 2003 10. Author's Address Dave Thaler Microsoft Corporation One Microsoft Way Redmond, WA 98052-6399 Phone: +1 425 703 8835 EMail: dthaler@microsoft.com Thaler Standards Track [Page 36] RFC 3559 Multicast Address Allocation MIB June 2003 11. Full Copyright Statement Copyright (C) The Internet Society (2003). All Rights Reserved. This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English. The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns. This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society. Thaler Standards Track [Page 37]