UCD-SNMP-MIB DEFINITIONS ::= BEGIN -- Design notes: -- -- The design of this mib may seem unusual in parts, as it was -- designed for ease of numerical management routines. -- -- In that light, most sub-sections of this mib have four common -- numerical oid consistencies: -- -- 2021.ID.1 : an integer index value. In scalers, this is always -- of value 1. In tables it is a row index. -- 2021.ID.2 : a name of the script, process, etc. that this row represents. -- 2021.ID.100 : An error flag indicating if an error is present on -- that row (a threshold value was crossed, etc). -- 2021.ID.101 : An error string describing why the error flag is non-0. -- -- These conventions enable managers to easy examine portions of the -- mib by setting the ID to the sub-section they are interested in -- monitoring, and then scanning the .100 value to check for an -- error(s), and get a more specific error message from .101 for the -- named check found in .2. -- -- Row numbers between 2 and 100 are sub-section specific. -- -- Mib sections utilizing the above conventions: -- Tables: procTable, execTable, diskTable, loadTable -- Scalers: memory, snmperrs IMPORTS OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY, Integer32, Opaque, enterprises, Counter32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, TruthValue FROM SNMPv2-TC; ucdavis MODULE-IDENTITY LAST-UPDATED "200101170000Z" ORGANIZATION "University of California, Davis" CONTACT-INFO "The ucd-snmp-coders mailing list is the best place to write for public questions about the ucd-snmp project: ucd-snmp-coders@ucd-snmp.ucdavis.edu Primary Author: Wes Hardaker postal: IT-DCAS UCDavis Davis CA 95616 phone: +1 530 754-7571 email: wjhardaker@ucdavis.edu" DESCRIPTION "This file defines the private UCD SNMP MIB extensions." REVISION "200101170000Z" DESCRIPTION "Added raw CPU and IO counters." REVISION "9912090000Z" DESCRIPTION "SMIv2 version converted from older MIB definitions." ::= { enterprises 2021 } -- Current UCD core mib table entries: -- prTable OBJECT IDENTIFIER ::= { ucdavis 2 } -- memory OBJECT IDENTIFIER ::= { ucdavis 4 } -- extTable OBJECT IDENTIFIER ::= { ucdavis 8 } -- diskTable OBJECT IDENTIFIER ::= { ucdavis 9 } -- loadTable OBJECT IDENTIFIER ::= { ucdavis 10 } -- systemStats OBJECT IDENTIFIER ::= { ucdavis 11 } -- ucdDemoMIB OBJECT IDENTIFIER ::= { ucdavis 14 } - UCD-DEMO-MIB -- fileTable OBJECT IDENTIFIER ::= { ucdavis 15 } -- version OBJECT IDENTIFIER ::= { ucdavis 100 } -- snmperrs OBJECT IDENTIFIER ::= { ucdavis 101 } -- mibRegistryTable OBJECT IDENTIFIER ::= { ucdavis 102 } -- Older mib table entries that were changed to new locations above: -- processes OBJECT IDENTIFIER ::= { ucdavis 1 } -- exec OBJECT IDENTIFIER ::= { ucdavis 3 } -- disk OBJECT IDENTIFIER ::= { ucdavis 6 } -- load OBJECT IDENTIFIER ::= { ucdavis 7 } -- Never implemented and removed from the mib: -- lockd OBJECT IDENTIFIER ::= { ucdavis 5 } -- Branches for registering other UCD MIB modules: ucdInternal OBJECT IDENTIFIER ::= { ucdavis 12 } ucdExperimental OBJECT IDENTIFIER ::= { ucdavis 13 } -- OID values assigned in the ucdExperimental branch: -- ucdIpFwAccMIB OBJECT IDENTIFIER ::= { ucdExperimental 1 } - UCD-IPFWACC-MIB -- ucdIpFilter OBJECT IDENTIFIER ::= { ucdExperimental 2 } - UCD-IPFILTER-MIB -- wavelan OBJECT IDENTIFIER ::= { ucdExperimental 3 } - WL-MIB -- ucdDlmodMIB OBJECT IDENTIFIER ::= { ucdExperimental 14 } - UCD-DLMOD-MIB -- ucdDiskIOMIB OBJECT IDENTIFIER ::= { ucdExperimental 15 } - UCD-DISKIO-MIB -- These are the returned values of the agent type. -- returned to: .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID.0 ucdSnmpAgent OBJECT IDENTIFIER ::= { ucdavis 250 } hpux9 OBJECT IDENTIFIER ::= { ucdSnmpAgent 1 } hpux10 OBJECT IDENTIFIER ::= { ucdSnmpAgent 6 } sunos4 OBJECT IDENTIFIER ::= { ucdSnmpAgent 2 } solaris OBJECT IDENTIFIER ::= { ucdSnmpAgent 3 } osf OBJECT IDENTIFIER ::= { ucdSnmpAgent 4 } ultrix OBJECT IDENTIFIER ::= { ucdSnmpAgent 5 } netbsd1 OBJECT IDENTIFIER ::= { ucdSnmpAgent 7 } freebsd OBJECT IDENTIFIER ::= { ucdSnmpAgent 8 } irix OBJECT IDENTIFIER ::= { ucdSnmpAgent 9 } linux OBJECT IDENTIFIER ::= { ucdSnmpAgent 10 } bsdi OBJECT IDENTIFIER ::= { ucdSnmpAgent 11 } openbsd OBJECT IDENTIFIER ::= { ucdSnmpAgent 12 } unknown OBJECT IDENTIFIER ::= { ucdSnmpAgent 255 } -- -- Define the Float Textual Convention -- This definition was written by David Perkins. -- Float ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A single precision floating-point number. The semantics and encoding are identical for type 'single' defined in IEEE Standard for Binary Floating-Point, ANSI/IEEE Std 754-1985. The value is restricted to the BER serialization of the following ASN.1 type: FLOATTYPE ::= [120] IMPLICIT FloatType (note: the value 120 is the sum of '30'h and '48'h) The BER serialization of the length for values of this type must use the definite length, short encoding form. For example, the BER serialization of value 123 of type FLOATTYPE is '9f780442f60000'h. (The tag is '9f78'h; the length is '04'h; and the value is '42f60000'h.) The BER serialization of value '9f780442f60000'h of data type Opaque is '44079f780442f60000'h. (The tag is '44'h; the length is '07'h; and the value is '9f780442f60000'h." SYNTAX Opaque (SIZE (7)) -- -- Process table checks -- prTable OBJECT-TYPE SYNTAX SEQUENCE OF PrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information on running programs/daemons configured for monitoring in the snmpd.conf file of the agent. Processes violating the number of running processes required by the agent's configuration file are flagged with numerical and textual errors." ::= { ucdavis 2 } prEntry OBJECT-TYPE SYNTAX PrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing a process and its statistics." INDEX { prIndex } ::= { prTable 1 } PrEntry ::= SEQUENCE { prIndex Integer32, prNames DisplayString, prMin Integer32, prMax Integer32, prCount Integer32, prErrorFlag Integer32, prErrMessage DisplayString, prErrFix Integer32, prErrFixCmd DisplayString } prIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Reference Index for each observed process." ::= { prEntry 1 } prNames OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The process name we're counting/checking on." ::= { prEntry 2 } prMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum number of processes that should be running. An error flag is generated if the number of running processes is < the minimum." ::= { prEntry 3 } prMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of processes that should be running. An error flag is generated if the number of running processes is > the maximum." ::= { prEntry 4 } prCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of current processes running with the name in question." ::= { prEntry 5 } prErrorFlag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A Error flag to indicate trouble with a process. It goes to 1 if there is an error, 0 if no error." ::= { prEntry 100 } prErrMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "An error message describing the problem (if one exists)." ::= { prEntry 101 } prErrFix OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to one will try to fix the problem if the agent has been configured with a script to call to attempt to fix problems automatically using remote snmp operations." ::= { prEntry 102 } prErrFixCmd OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The command that gets run when the prErrFix column is set to 1." ::= { prEntry 103 } extTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of extensible commands returning output and result codes. These commands are configured via the agent's snmpd.conf file." ::= { ucdavis 8 } extEntry OBJECT-TYPE SYNTAX ExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing an extensible script/program and its output." INDEX { extIndex } ::= { extTable 1 } ExtEntry ::= SEQUENCE { extIndex Integer32, extNames DisplayString, extCommand DisplayString, extResult Integer32, extOutput DisplayString, extErrFix Integer32, extErrFixCmd DisplayString } extIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Reference Index for extensible scripts. Simply an integer row number." ::= { extEntry 1 } extNames OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A Short, one name description of the extensible command." ::= { extEntry 2 } extCommand OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The command line to be executed." ::= { extEntry 3 } extResult OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The result code (exit status) from the executed command." ::= { extEntry 100 } extOutput OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The first line of output of the executed command." ::= { extEntry 101 } extErrFix OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to one will try to fix the problem if the agent has been configured with a script to call to attempt to fix problems automatically using remote snmp operations." ::= { extEntry 102 } extErrFixCmd OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The command that gets run when the extErrFix column is set to 1." ::= { extEntry 103 } -- -- Memory usage/watch reporting. -- Not supported on all systems! -- See agent/mibgroup/ucd_snmp.h to see if its loaded for your architecture. -- memory OBJECT IDENTIFIER ::= { ucdavis 4 } memIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bogus Index. This should always return the integer 0." ::= { memory 1 } memErrorName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Bogus Name. This should always return the string 'swap'." ::= { memory 2 } memTotalSwap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Swap Size configured for the host." ::= { memory 3 } memAvailSwap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Available Swap Space on the host." ::= { memory 4 } memTotalReal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Real/Physical Memory Size on the host." ::= { memory 5 } memAvailReal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Available Real/Physical Memory Space on the host." ::= { memory 6 } memTotalSwapTXT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total virtual memory used by text." ::= { memory 7 } memAvailSwapTXT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Active virtual memory used by text." ::= { memory 8 } memTotalRealTXT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Real/Physical Memory Size used by text." ::= { memory 9 } memAvailRealTXT OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Active Real/Physical Memory Space used by text." ::= { memory 10 } memTotalFree OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Available Memory on the host" ::= { memory 11 } memMinimumSwap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum amount of free swap required to be free or else memErrorSwap is set to 1 and an error string is returned memSwapErrorMsg." ::= { memory 12 } memShared OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Shared Memory" ::= { memory 13 } memBuffer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Buffered Memory" ::= { memory 14 } memCached OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Cached Memory" ::= { memory 15 } memSwapError OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Error flag. 1 indicates very little swap space left" ::= { memory 100 } memSwapErrorMsg OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Error message describing the Error Flag condition" ::= { memory 101 } dskTable OBJECT-TYPE SYNTAX SEQUENCE OF DskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Disk watching information. Partions to be watched are configured by the snmpd.conf file of the agent." ::= { ucdavis 9 } dskEntry OBJECT-TYPE SYNTAX DskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing a disk and its statistics." INDEX { dskIndex } ::= { dskTable 1 } DskEntry ::= SEQUENCE { dskIndex Integer32, dskPath DisplayString, dskDevice DisplayString, dskMinimum Integer32, dskMinPercent Integer32, dskTotal Integer32, dskAvail Integer32, dskUsed Integer32, dskPercent Integer32, dskPercentNode Integer32, dskErrorFlag Integer32, dskErrorMsg DisplayString } dskIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Integer reference number (row number) for the disk mib." ::= { dskEntry 1 } dskPath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Path where the disk is mounted." ::= { dskEntry 2 } dskDevice OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Path of the device for the partition" ::= { dskEntry 3 } dskMinimum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum space required on the disk (in kBytes) before the errors are triggered. Either this or dskMinPercent is configured via the agent's snmpd.conf file." ::= { dskEntry 4 } dskMinPercent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of minimum space required on the disk before the errors are triggered. Either this or dskMinimum is configured via the agent's snmpd.conf file." ::= { dskEntry 5 } dskTotal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total size of the disk/partion (kBytes)" ::= { dskEntry 6 } dskAvail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Available space on the disk" ::= { dskEntry 7 } dskUsed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Used space on the disk" ::= { dskEntry 8 } dskPercent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of space used on disk" ::= { dskEntry 9 } dskPercentNode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of inodes used on disk" ::= { dskEntry 10 } dskErrorFlag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Error flag signaling that the disk or partition is under the minimum required space configured for it." ::= { dskEntry 100 } dskErrorMsg OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A text description providing a warning and the space left on the disk." ::= { dskEntry 101 } laTable OBJECT-TYPE SYNTAX SEQUENCE OF LaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Load average information." ::= { ucdavis 10 } laEntry OBJECT-TYPE SYNTAX LaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing a load average and its values." INDEX { laIndex } ::= { laTable 1 } LaEntry ::= SEQUENCE { laIndex Integer32, laNames DisplayString, laLoad DisplayString, laConfig DisplayString, laLoadInt Integer32, laLoadFloat Float, laErrorFlag Integer32, laErrMessage DisplayString } laIndex OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "reference index/row number for each observed loadave." ::= { laEntry 1 } laNames OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The list of loadave names we're watching." ::= { laEntry 2 } laLoad OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The 1,5 and 10 minute load averages (one per row)." ::= { laEntry 3 } laConfig OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The watch point for load-averages to signal an error. If the load averages rises above this value, the laErrorFlag below is set." ::= { laEntry 4 } laLoadInt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The 1,5 and 10 minute load averages as an integer. This is computed by taking the floating point loadaverage value and multiplying by 100, then converting the value to an integer." ::= { laEntry 5 } laLoadFloat OBJECT-TYPE SYNTAX Float MAX-ACCESS read-only STATUS current DESCRIPTION "The 1,5 and 10 minute load averages as an opaquely wrapped floating point number." ::= { laEntry 6 } laErrorFlag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A Error flag to indicate the load-average has crossed its threshold value defined in the snmpd.conf file. It is set to 1 if the threshold is crossed, 0 otherwise." ::= { laEntry 100 } laErrMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "An error message describing the load-average and its surpased watch-point value." ::= { laEntry 101 } version OBJECT IDENTIFIER ::= { ucdavis 100 } versionIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index to mib (always 0)" ::= { version 1 } versionTag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "CVS tag keyword" ::= { version 2 } versionDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Date string from RCS keyword" ::= { version 3 } versionCDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Date string from ctime() " ::= { version 4 } versionIdent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Id string from RCS keyword" ::= { version 5 } versionConfigureOptions OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Options passed to the configure script when this agent was built." ::= { version 6 } versionClearCache OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set to 1 to clear the exec cache, if enabled" ::= { version 10 } versionUpdateConfig OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set to 1 to read-read the config file(s)." ::= { version 11 } versionRestartAgent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set to 1 to restart the agent." ::= { version 12 } versionDoDebugging OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set to 1 to turn debugging statements on in the agent or 0 to turn it off." ::= { version 20 } snmperrs OBJECT IDENTIFIER ::= { ucdavis 101 } snmperrIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bogus Index for snmperrs (always 0)." ::= { snmperrs 1 } snmperrNames OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "snmp" ::= { snmperrs 2 } snmperrErrorFlag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A Error flag to indicate trouble with the agent. It goes to 1 if there is an error, 0 if no error." ::= { snmperrs 100 } snmperrErrMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "An error message describing the problem (if one exists)." ::= { snmperrs 101 } mrTable OBJECT-TYPE SYNTAX SEQUENCE OF MrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table displaying all the oid's registered by mib modules in the agent. Since the agent is modular in nature, this lists each module's OID it is responsible for and the name of the module" ::= { ucdavis 102 } mrEntry OBJECT-TYPE SYNTAX MrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing a registered mib oid." INDEX { IMPLIED mrIndex } ::= { mrTable 1 } MrEntry ::= SEQUENCE { mrIndex OBJECT IDENTIFIER, mrModuleName DisplayString } mrIndex OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The registry slot of a mibmodule." ::= { mrEntry 1 } mrModuleName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The module name that registered this OID." ::= { mrEntry 2 } systemStats OBJECT IDENTIFIER ::= { ucdavis 11 } ssIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Reference Index for each observed systemStat (1)." ::= { systemStats 1 } ssErrorName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The list of systemStats names (vmstat) we're Counting." ::= { systemStats 2 } ssSwapIn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of memory swapped in from disk (kB/s)." ::= { systemStats 3 } ssSwapOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of memory swapped to disk (kB/s)." ::= { systemStats 4 } ssIOSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Blocks sent to a block device (blocks/s)." ::= { systemStats 5 } ssIOReceive OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Blocks received from a block device (blocks/s)." ::= { systemStats 6 } ssSysInterrupts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of interrupts per second, including the clock." ::= { systemStats 7 } ssSysContext OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of context switches per second." ::= { systemStats 8 } ssCpuUser OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "percentages of user CPU time." ::= { systemStats 9 } ssCpuSystem OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "percentages of system CPU time." ::= { systemStats 10 } ssCpuIdle OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "percentages of idle CPU time." ::= { systemStats 11 } -- The agent only implements those of the following counters that the -- kernel supports! Don't expect all to be present. ssCpuRawUser OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "user CPU time." ::= { systemStats 50 } ssCpuRawNice OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "nice CPU time." ::= { systemStats 51 } ssCpuRawSystem OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "system CPU time." ::= { systemStats 52 } ssCpuRawIdle OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "idle CPU time." ::= { systemStats 53 } ssCpuRawWait OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "iowait CPU time. This is primarily a SysV thingie" ::= { systemStats 54 } ssCpuRawKernel OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "kernel CPU time." ::= { systemStats 55 } ssCpuRawInterrupt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "interruptlevel CPU time. This is primarily a BSD thingie" ::= { systemStats 56 } ssIORawSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of requests sent to a block device" ::= { systemStats 57 } ssIORawReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of interrupts processed" ::= { systemStats 58 } ssRawInterrupts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of requests received from a block device" ::= { systemStats 59 } ssRawContexts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of context switches" ::= { systemStats 60 } -- possibly used in the future: -- -- ssErrorFlag OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Error flag." -- ::= { systemStats 100 } -- -- ssErrMessage OBJECT-TYPE -- SYNTAX DisplayString -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Error message describing the errorflag condition." -- ::= { systemStats 101 } ucdTraps OBJECT IDENTIFIER ::= { ucdavis 251 } ucdStart NOTIFICATION-TYPE STATUS current DESCRIPTION "" ::= { ucdTraps 1 } ucdShutdown NOTIFICATION-TYPE STATUS current DESCRIPTION "This trap is sent when the agent terminates" ::= { ucdTraps 2 } -- -- File Table: monitor a list of files to check for a maximum size. -- fileTable OBJECT-TYPE SYNTAX SEQUENCE OF FileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of monitored files." ::= { ucdavis 15 } fileEntry OBJECT-TYPE SYNTAX FileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of file" INDEX { fileIndex } ::= { fileTable 1 } FileEntry ::= SEQUENCE { fileIndex Integer32, fileName DisplayString, fileSize Integer32, fileMax Integer32, fileErrorFlag TruthValue, fileErrorMsg DisplayString } fileIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of file" ::= { fileEntry 1 } fileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Filename" ::= { fileEntry 2 } fileSize OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "Size of file (kB)" ::= { fileEntry 3 } fileMax OBJECT-TYPE SYNTAX Integer32 UNITS "kB" MAX-ACCESS read-only STATUS current DESCRIPTION "Limit of filesize (kB)" ::= { fileEntry 4 } fileErrorFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Limit exceeded flag" ::= { fileEntry 100 } fileErrorMsg OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Filesize error message" ::= { fileEntry 101 } END